Carcassonne Central

So I'm trying my hand at making some tiles, and it's going pretty well using sticker paper and my inkjet printer.  However, when I tried a glossy spray to finish them off, the tiles get significantly darker.  Any suggestions on avoiding this?  Would laserjet printing solve this?  Or a particularly top coat gloss product?  Thanks for any help you can offer.

Yeah, laserjet will give much better results than inkjet, and it will be glossy enough that you can just cut, peel, and stick.

I had the same problem, since the glossy spray seeped through the sticker, blending the original tile and sticker ink...

You may want to try higher quality label paper, or several very light sprays of the finish, instead of soaking the new tile.

CARC_Zoner

Thanks Carc_Zoner, that's what I ended up doing and it worked pretty well. 

This has got to be one of the best ideas of seem so far...

http://www.instructables.com/id/Using-Adhesive-Backed-Floor-tiles-to-make-Print-/

Brilliant. Thanks you for sharing!

Making my own tiles

I found a post (sorry dont know how to link) on BGG on how I spent a wet weekend

an instructional on making tiles

this was my inspiration

so I bought a great pack of stock card, bug sheets each 1.8mm thick I think, then print on an inkjet on 160gsm paper, both fronts from the expansions and backs from the downloads,

a can of spay on craft adhesive on the card and stick on the fronts

when dry I use (only because I dont have the right tool) a 2inch chisel with the bevel facing the tile to chop out each tile individually (quite labour intensive, let me tell you).

then I draw A grid on the back of the "backs" paper (holding it up against a window to see through) more spray on adhesive and put each tile into the grid.

cut out the almost complete tiles with a stanley knife, then snip the corners with the chisel.

I have bought some spray on varnish to coat the tiles but I havn't attempted it yet, I need to run a test tile first to see if it passes some kind of tacktile test.

as they are we can tell mine from the originals (though not easily) if you hold one of each, some of mine feel ever so slightly thicker, but drawing from a bag its very hard to tell one from the other.